For the installation of gas pipelines using pipes from various materials: HDPE, steel and copper. Polymeric products are used only for underground laying, steel wiring is mounted inside houses and apartments.
Today, when the quality of the metal has improved and the opportunity has appeared to produce products of the required thickness and length, copper pipes for gas are increasingly being installed. They are excellent for low pressure gas pipelines and have suitable characteristics for strength, flexibility and wear resistance.
If you decide to assemble an intra-house gas pipeline yourself, it will not be superfluous to get acquainted with the properties of copper pipes and press fittings, learn more about assembly methods and the requirements that apply to products.
What are the requirements for copper pipes
Companies manufacturing products for the installation of gas pipelines never use copper alloys with other materials in production, as quality is lost. The purity of the metal should not be below 99.9%.
Grades used for the manufacture of pipes:
- at domestic enterprises - M1, M2, M1r, M2r;
- foreign analogues - Cu-DHP.
Depending on the production method and physical properties, finished products are divided into 3 categories: soft (R - tensile strength 220 MPa), semi-solid (R - tensile strength 250 MPa), solid (R - tensile strength 290 MPa).
For installation of gas pipelines, it is recommended to take pipes of solid or increased hardness. Soft ones are suitable only for connection to the network of gas equipment - boilers, stoves, columns
It is noted that long-term storage affects the quality of copper - it becomes harder. It is possible to return former qualities by means of annealing. In order not to produce additional recovery measures, we do not recommend buying installation products with a margin.
Do not use tubular products whose wall thickness is less than 1 mm. Thin pipes are not suitable for requirements, they may be damaged during assembly - when bending or crimping
According to the manufacturing technology, gas pipes are divided into 2 groups:
- welded - in the production of which welding is used, therefore, there are seams;
- seamless - monolithic, seamless products.
The second group is preferable to use, since the seams will always be areas from the risk zone, that is, have reduced characteristics in terms of tightness.
In addition to ordinary copper pipes and fittings, products with an outer shell are also made from polymeric materials - PVC or foamed polyethylene. The advantages of such products are additional external protection and a kind of disguise.
Copper products are often used as design elements, so they place the pipeline in a prominent place and assemble using stylized fittings and fasteners
Sewing a gas pipeline from copper into a concrete wall or hiding it behind drywall is prohibited by law.
Norms and regulation of standards
The gas pipeline refers to structures that pose a potential danger to the residents of the house, therefore both the production of products and installation work are subject to the requirements set forth in the regulatory documentation.
The basis for modern codes of practice were the norms of 1987 - SNiP 2.04.08-87.
Now you can find information on copper pipelines in the following documents:
- SP 42-101-2003 - on the design and construction of gas distribution systems;
- SNiP 42-01-2002 - norms and rules of GDS;
- OST 153-39.3-051-2003 - operation of GDS.
Together with the main documents, it is necessary to study additions and refinements that appear periodically in connection with the development of technologies and the release of new products. Suppose SNiP 42-01-2002 in 2011 was amended and supplemented with materials, including requirements for copper products. New revision - SP 62.13330.2011.
If you have concluded an agreement with the gas service for the installation and maintenance of the gas pipeline, then workers must purchase materials and assemble the pipeline in accordance with regulatory documents
The general requirements should also be added to the rules for the installation of structures made of copper gas pipes. A sample of such a document is the STO “Design, installation and operation of gas pipelines from copper pipes for gasification of residential and public buildings”, which details the nuances of the gas pipeline assembly and requirements for pipes.
For more information on the requirements for copper pipes and fittings, see the following documents:
- GOST 617-90;
- GOST 859-78;
- GOST R 52318-2005;
- EN1057 - European standards;
- GOST R 52948-2008;
- GOST R 52922-2008;
- GOST R 52949-2008.
We warn that when using products that do not meet legally sound requirements, the operation of the gas pipeline becomes dangerous.
Recruitment Recommendations
Attracting fans to the installation work is not the best solution. We advise you to contact a company that has long been involved in the installation of domestic gas pipelines and has experienced gas system installers.
If you decide to independently engage in welding, soldering or crimping of copper pipes, the work must be controlled by a master with experience and access to such work
The qualifications of employees are documented, so you have the right to request a certificate.
For soldering or welding, specialists are allowed who, according to OK 016, have received 4th category and above. The conclusion is given by the certification committee based on the rules of RD 03-495-02 and PB 03-273-99.
Crimping can be done by workers with the 3rd category and higher, having experience in assembling copper gas pipelines and having passed certain tests. In order to gain admission to practice, the contractor must perform at least 3 high-quality and tested by the commission connections press fittings. Monitoring of the work performed is determined by the rules of SNiP 3.01.01.
Features of the assembly of a copper gas pipeline
The assembly and connection of copper pipes for an intra-home gas pipeline differs from installation work carried out with other types of products - for example, polymer or steel.
For soldering copper elements, brazing alloy is used. It differs from soft in that it has a higher melting point - from + 600 ° C and above
Brazing alloy is used without flux; popular materials include PMFOtsr6-4-0-0.03 and PMFS6-0.15 - copper-phosphorus compounds.
If soldering is used as an advantage for intra-house wiring, then at the entrance to the house, where large-diameter pipes are mounted, the connecting work is performed by argon-arc or gas welding.
Other rules for installation work on the installation of a copper gas pipeline:
Image Gallery
Photo from
Yellow part marking
Copper fittings for connection
Connection of copper and steel elements
Place of installation of a copper gas pipeline
Plastic brackets and other polymer fasteners are not allowed. If the gates are cut out for arranging the internal wiring, then they can not be closed from the outside, and the space around the pipes in the gate must be free.
Pipe Installation Instructions
The gas pipeline installation includes 3 stages:
- design;
- pipe preparation;
- installation.
At the end, a trial run is made and the pipeline is checked for leaks.
We will analyze the main ways of preparing parts for installation - bending and cutting, as well as two popular ways of connecting pipes - pressing and soldering.
How is copper cutting and bending
Before starting installation work, it is necessary to prepare the pipes. Completely straight gas pipelines are rare, more often they consist of combinations of straight and bent elements. This means that the pipe material must be cut, and some parts must be carefully bent at a given angle, 90 ° or blunt.
For cutting, you can use a hacksaw for metal, a circular electric saw, but the pipe cutter is considered the most acceptable tool.
Pipe cutters differ in that they make a perfectly even cut perpendicular to the direction of the pipe. The cutting is quick and accurate, and the flat edge of the workpiece does not require additional processing
During the cutting process, make sure that the pipe does not deform - any bulges, cracks or dents will endanger the tightness of the gas pipeline.
Bending can be carried out cold and hot. The first is used for thin pipes, most often used in everyday life, with a diameter of up to 22 mm. The hot method is used for products with a large diameter. The pipe is heated by filling the bend with sand. This is necessary so that there are no creases.
For cold bending, pipe benders are used - special machines. In everyday life, spring devices are used, into which thin pipes are first inserted, and then they are carefully bent
For heating, experienced craftsmen use a torch, acetylene-oxygen or acetylene-air. Operating temperature - from + 650 ° C. The readiness of copper is determined by the shade: as soon as it becomes a dark red color, you can bend. The procedure is carried out quickly, but carefully.
Connection methods: crimping and soldering
If you have time, proven skills and experience, you can try to solder copper pipes yourself. This method is longer than crimping, but it is inexpensive and reliable.
Soldering should be carried out under certain conditions: in a ventilated room, at a temperature of -10 ° C to + 40 ° C, and preferably at room temperature
Procedure:
- Preparation of parts: cutting and bending pipes, if necessary - flaring and calibration.
- Stripping the ends of the connected segments, eliminating any defects.
- Insert the end of one pipe into the expanded end of the other.
- Warming up the soldering section to the melting point of the solder.
- Solder feed into the gap between the two parts.
- Cooling the soldering zone and stripping the joint to a shine.
After soldering, diagnostics are performed. A system leak test is performed by a special commission.
Connecting using press fittings is a reliable modern method, the main advantage of which is the fast assembly speed of the gas pipeline.
Instructions for connecting the pipeline elements by pressing:
Image Gallery
Photo from
All elements of the future gas pipeline for internal wiring must match the diameter and wall thickness. For connection, copper and brass fittings and adapters can be used.
When assembling, it is impossible to use copper products intended for water supply or other communications. Products for the gas pipeline are marked with yellow marking - dots, stripes, stamps
When performing pressing use special press tongs. The universal tool is equipped with a set of heads for pressing fittings of various diameters
Before connecting the pieces of copper pipes with fittings, they must be prepared - cut into the necessary fragments and, if necessary, bent according to the previously prepared scheme at a given angle
The ends of the segments connected by fittings must be cleaned with a special tool so that the connection is more tight
It is necessary to take a fitting that is suitable in diameter and put it on the prepared end of the pipe. For precise crimping, a strip is drawn along the edge of the fitting with a black marker
The head is put on the fitting, secured and pressed, by pressing the lever or handle. The procedure takes place automatically
For the initial test, you can examine the place of pressure testing - the copper elements must be in close contact around the circumference, when trying to disconnect them with effort - keep the position
Step 1 - Buy Pipes and Fittings
Step 2 - Labeling Gas Products
Step 3 - preparing the crimping tool
Step 4 - preparing pipes for crimping
Step 5 - stripping the ends of the pipes
Step 6 - pipe and fitting connection
Step 7 - crimping the connection with press tongs
Step 8 - Testing the Connection for Leaks
If the hand is full, then when assembling a small fragment, several elements are first connected to the fittings, and then they are pressed at one stroke. It is recommended to assemble the intra-house gas system in parts - first separately complex sections with a large number of bent elements, and then already between them.
In the connection of copper pipes, collet (crimp) fittings are also used, which are practically not used in the assembly of gas pipelines due to the not very high reliability of the collapsible assembly. The most reliable compounds are those formed by soldering.
However, to realize the brazing of copper pipes, experience and an appropriate tool are needed: a blowtorch for a low-temperature connection, a propane or acetylene torch for a high-temperature one.
An example of installing a copper gas pipeline in a country house:
How to crimp copper fittings:
About the benefits of replacing pipes with copper:
A home gas pipeline made of copper pipes is reliable and aesthetically appealing. It is considered one of the best options for installation in a private house or apartment. But, planning to install a copper structure, do not forget about safety: if you do not have experience working with pipes, it is better to entrust the installation to specialists.
Do you want to share your own experience in assembling a pipeline from copper pipes? Do you have valuable information on the topic of an article that may be useful to site visitors? Please leave comments in the block below, ask questions about interested and controversial issues, post a photo.