The existing variety of cables and wires for the most part are calculated in three-digit numbers. Therefore, it is not possible to describe the entire range in one article.
Meanwhile, it is not necessary to paint all types of cables and wires and their purpose. It is enough to have an idea of the marking standards and be able to extract the necessary information from the characteristics in order to select the appropriate option according to the purpose from the variety of cable products.
Consider the main points of how you can learn to distinguish electric wires among an array of such products, as well as provide descriptions of the most popular wires and cables.
The structural basis of the cable product
The performance of the cable or electrical wires determines the technical and operational characteristics of the product. Actually, the execution of cable or wire products is, in most design variations, a fairly simple technological approach.
Classic performance:
- Cable insulation.
- Core insulation.
- Metal core - solid / bundle.
A metal core is the base of a cable / wire through which an electric current flows. The main characteristic, in this case, is the throughput, determined by the cross section of the core. This parameter is influenced by the structure - solid or beam.
A property such as flexibility also depends on the structure. Stranded (bundled) conductors are characterized by better properties in terms of “softness” of bending than single-core conductors.
The structural design of the current-carrying part is traditionally represented as “bundled” or “solid” (monolithic). This is important, for example, in relation to the properties of flexibility. The picture shows the stranded / bundled type of wire
Conductors of cables and wires in electrical practice, as a rule, have a cylindrical shape. At the same time, rarely, but there are several modified forms: square, oval.
The main material for the manufacture of conductive metal cores are copper and aluminum. However, electrical practice does not exclude conductors in the structure of which there are steel conductors, for example, a “field” wire.
If a single electrical wire is traditionally built on a single conductive core, the cable is the product where several such conductors are concentrated.
Insulation component of wires and cable
An integral part of cable products is the insulation of a metal current-carrying base. The purpose of the insulation is quite understandable - providing an isolated state for each current-carrying core, preventing the effect of a short circuit.
In most cases, the insulation material is polyvinyl chloride, which in practice has shown quite acceptable qualities in the construction of widespread electrical networks
Depending on the purpose of the cable (wire) products, the insulating part may have different designs.
The dielectric material may be:
- ceramics;
- glass;
- polyvinyl chloride;
- celluloid;
- polymers and others
In addition to the protection of a purely electric plan, the insulating material also provides mechanical protection, protects the electric wire (cable) from moisture and other destructive factors.
There is also a special insulating construction applied to electric wires and cables, endowing products with “armored” or “anti-chemical” properties.
Special design - “armored”, reliably protects the internal structure, prevents moisture penetration, acts as a buffer against mechanical overloads
Cable Features and Conducting
Often in unprofessional practice, the term “cable” is equated to any type of electrical wire. Meanwhile, the concepts of “cable” and “wire” should be separated. And, above all, the separation provides for the transmit power factor.
Cable - a product whose structure combines at least three conductors in insulation, additionally protected inside the shell with a special material - parchment, rubber, lead, etc.
The wire - a product consisting of one, at most, five conductors (cord), for the latter case united by a common casing.
The classic structure of the power cable: 5 - sheath assembly protective; 4 - armored layer; 3 - a common sheath of current-carrying metal conductors; 2 - insulation of conductors directly; 1 - metal conductor
The priority use of cables is for industrial purposes. Wires are actively used in everyday life, as well as in other areas.
Separately, highlight bare wires that do not have insulation. The main application for such products is in the arrangement of centralized power lines.
The main types of electrical wires
Wires of electrical networks are classified based on load power and application conditions. For everyday life, the following types of wires are typical: PBPP, PBPPg, APUNP, PPV, APPV, APV, PV1 - PV3, PVS, ShVVP.
Type # 1 - PBPP wire (flat shape)
A product with a polyvinyl chloride insulating sheath, under which a solid cast copper core is hidden. This electrical material is made with conductors with a cross section of 1.5 - 6.0 mm2.
The execution of a flat shape is a fairly convenient form of an electrical conductor for use in household construction of power lines. Thanks to the copper current-carrying part, it is permissible to connect a powerful load
It is allowed to use PBPP wire in conditions of ambient temperature from -15 ° С to + 50 ° С. The wire is designed for the installation of networks with a voltage of no higher than 250 V. The traditional use of PBPP is the installation of outlet lines for the household sector. Such a wire is often used to organize wiring in an apartment.
Type # 2 - modification PBPG
In fact, the product is presented in the same version as described for the PBPP, with the exception of one nuance indicated by the letter “g” of the standard marking.
This nuance lies in the more pronounced properties of flexibility. In turn, the improved properties of flexibility are formed by the structure of the core of this wire brand, which is “bundled” and not solid.
The modified version in a two-wire version, where the structure of the “beam” current-carrying part is used. This option is also popular in the household.
Type # 3 - APUNP aluminum core
The presence of an aluminum core under the insulation is indicated directly by the product labeling - the first “A” symbol. Such a product is produced in a cross-sectional range of conductors 2.5-6.0 mm2.
The electric aluminum wire of the simplest execution of all existing options. Differs in the low price in the market, but at the same time possesses low quality
Such a conductor is not recommended for use by professional electricians. The only advantage of this brand is its low cost. However, for the construction of temporary light-load circuits it is quite acceptable to use.
Type # 4 - two-three-conductor PPV
The product is a two-three-conductor configuration, where current-carrying conductors are placed under PVC insulation and are held next to each other by means of an insulating jumper based on the same polyvinyl chloride.
At first glance, this type of wire resembles a glued pair. However, the connection of the pair is supported by a PVC jumper running along the entire length at the point of contact of insulation
Core wires (copper) can have a cross section in the range of 0.75-6.0 mm.
According to technical specifications, operability is supported at frequencies up to 400 Hz at voltages up to 450 V. The temperature limit is -50 / + 70 ° С.
Type # 5 - a variety under the brand name APPV
In fact, the same type of performance that the PPV brand demonstrates, with the exception of the presence of aluminum conductors instead of copper conductors. It is made in different sections, starting from 2.5 mm2.
Almost a complete analog of PPV, if you do not consider the material of the live part. In this modification, aluminum wires are used, which reduces the cost of the product, but slightly reduces the characteristics
This type of electrical wire is widely used in a variety of installation cases. Allowed to use APPV for open type wiring device.
Type # 6 - PVC aluminum with PVC insulation
It is made in two options of a configuration of veins - solid-cast single or bundle (multicore).
In this case, a single version is represented by products where the cross-sectional range is 2.5-16 mm2and the multi-core version is available in the range of 25-95 mm2.
Variation of “bundled” aluminum is another type of the whole variety of electric wires that is used quite often in the practice of constructing electric lines
This is one of those modifications that can be used in high humidity. A wide temperature range is supported - from -50 ° C to + 70 ° C.
Type # 7 - modification PV1 - PV5
In fact, an analogue of the reclosure, but is available exclusively with copper cores. The difference between indices 1 and 5 is that the first option is a solid-cast product, and the second option, respectively, is multi-core.
You can say - there is a design of reclosure, but the conductors are made exclusively of copper. In all other respects, the difference is practically not noticed. A specific view used for specific circuit designs
This variety is often used in the assembly of control cabinet circuits. Comes with multi-colored insulation.
Type # 8 - PVA connecting cable with PVC insulation
A view of a conductor representing the configuration of an electrical cord. It is produced with the number of cores 2-5 in the cross-sectional range of 0.75 - 16 mm. The structure of the wires is multiwire (beam).
A constructive version of the "cord" for a household electrician. Indeed, this “cord” is often used to connect relatively powerful household appliances. Represents a convenient connection option due to color separation
Designed for operation in networks with voltage up to 380 V at a frequency of 50 Hz.
The peculiarity of the execution of PVA is a high degree of flexibility. However, the temperature regime is somewhat limited - from -25 ° С to + 40 ° С.
Type # 9 - Flat ShVVP cord in PVC sheath
Another variety in the "cord" version. A variation in the number of wires connected by a PVC sheath in the amount of two or three is supported.
Flat two-wire “cord” - a pair of conductors enclosed in a polyvinyl chloride sheath. There is also a configuration with three conductors and a multicore structure of the live part
The main application is the domestic sphere, outdoor wiring. Operating voltage up to 380 V, core structure - bundle, maximum cross section 0.75 mm2.
Varieties of electrical cables
If we consider only cables for power electrical circuits, here the main view are the following power cables:
- VVG;
- KG;
- VBBSHV.
Of course, this is not a complete list of all existing cable products. Nevertheless, on the example of technical characteristics, a general idea of the cable for electrical purposes can be formed.
Execution under the VVG brand
Widely used, popular and reliable brand. The VVG cable is designed to transmit current with a voltage of 600 - 1000 volts (maximum 3000 V).
The product is made in two versions, with current-carrying conductors of a solid structure or a beam structure.
A product from the category of electrical cables, noted as a popular and often selected as a material for building electric power lines
According to the product specification, the core cross-section range is 1.5 - 50 mm. PVC insulation allows the cable to be used at temperatures of -40 ... + 50 ° C.
There are several modifications of this type of cable products:
- AVVG
- VVGng
- VVGp
- VVGz
Modifications are distinguished by a slightly different insulation performance, the use of aluminum conductors instead of copper conductors, by the shape of the cable.
KG type power cable
The construction of another popular cable, characterized by a high degree of flexibility, thanks to the use of a bundle structure of current-carrying conductors.
Execution of a power flexible cable of the KG brand for four working current-carrying conductors. The product is characterized by high quality insulation, demonstrates good technical characteristics.
The execution of this type provides for the presence of up to six current-carrying conductors inside the shell. Range of working temperatures is -60 ... + 50 ° С. Mostly, a type of KG is used to connect power equipment.
Armored cable VBBSHV
An example of the design of special cable products in the image of a product under the brand name VBBSHV. Conductive elements can be bundled or solid conductors. In the first case, the cross-sectional range is 50-240 mm2in the second 16-50 mm2.
Cable insulation is built with a complex structure, including belt insulation, tape screen, steel armor, bitumen and PVC.
The structure of the power cable for high voltage and significant power. This is one of those options for cable products, the use of which guarantees the reliability of the circuit.
There are several modifications of this type:
- VBbShvng - non-combustible insulation;
- VBBSHVNG-LS - when burning does not emit harmful substances;
- AVBBSHV - the presence of aluminum conductors.
The ability to read the labeling of cable products is useful when choosing products and wiring electrical networks.
Alphanumeric marking of the cable product: 1) letter 1 - metal core; 2) letter 2 - destination; 3) letter 3 - isolation; 4) letter 4 - features; 5) number 1 - number of cores; 6) number 2 - section; 7) number 3 - voltage (nominal) (+)
Features of the type of core material - Letter 1: "AND" –Aluminium core. In any other case, copper lived.
As for the purpose (Letter 2), here the decryption is as follows:
- "M" - for installation;
- "P (U)", MG - flexible for mounting;
- "Sh" - installation; "TO" - for control.
The designation of isolation (Letter 3) and its interpretation is as follows:
- "In (BP)" - PVC;
- "D" - double winding;
- "N (HP)" - non-combustible rubber;
- "P" - polyethylene;
- "R" - rubber;
- "FROM" - fiberglass;
- "TO" - nylon;
- "Sh" - silk polyamide;
- "E" - shielded.
The features that Literature 4 testifies to have their own decoding:
- "B" - armored;
- "G" - flexible;
- "TO" - wire braid;
- "ABOUT" - another braid;
- "T" - for pipe laying.
Also, the classification provides for the use of lowercase letters and letters indicated by the Latin alphabet:
- "Ng" - non-combustible
- "H" - filled
- "LS" - without chem. discharge during combustion,
- "HF" - no smoke when burning.
Markings, as a rule, are applied directly to the outer shell, and along the entire length of the product at regular intervals.
Table of symbols for the most used types of wires and their compliance with standards. It is always possible to identify a brand by simply reading directly from the product’s shell (+)
On our site there are articles on the selection of cable products for arranging electrical networks in an apartment and a house, we recommend that you read:
- What cable to use for wiring in the apartment: a review of the wires and choosing the best option
- Which wire to use for wiring in the house: recommendations for selection
- What cable to do wiring in a wooden house: types of non-combustible cable and its safe installation
The video below demonstrates the “novice electrician” lesson.
A rather useful video material is shown, which is recommended for viewing as an acquisition of generalizing knowledge on wires and cables:
Given the existence of an extensive range of wire and cable products, a potential electrician gets many options for solving any problems in the field of electrics.
However, even with such diversity, it is quite difficult to choose the right product for specific purposes, if there is no relevant knowledge. Hopefully this article will help you make the right choice.
Have something to supplement, or have questions about choosing electrical cables and wires? You can leave comments on the publication, participate in discussions and share your own experience in using cable products. The contact form is located in the lower block.